control winding
英 [kənˈtrəʊl ˈwɪndɪŋ]
美 [kənˈtroʊl ˈwɪndɪŋ]
网络 控制绕组; 控制线匝
双语例句
- The PI Control of Winding in Copper Foil Production Based on PLC
利用PLC实现铜箔收卷的PI控制 - Principle and Analysis of Doubly Salient Permanent Magnet Machine With Novel Full-Pitch Windings Research on Control Winding Reactive Power of Dual Stator-winding Asynchronous Generator
新型整距绕组双凸极永磁电机工作原理及特性双绕组异步发电机控制绕组无功容量分析 - Research on Control Winding Reactive Power of Dual Stator-winding Asynchronous Generator
双绕组异步发电机控制绕组无功容量分析 - Scherbius Variable-speed Control of Winding Induction Drive Motor Using Double PWM Rectifier
基于双PWM整流器绕线异步电机串级调速控制 - Therefore, it is of great importance to equip an accurate tension controller on numeric control winding machine.
由此可见，性能优良的数控缠绕机必须配备精确控制张力的张力控制器。 - It is necessary to adjust the working process of the microcomputer numerical control fibre winding machine manually for fibre breaking and other failures in work.
由于在生产中会发生纤维断线和其他问题，因此需要对微机数控纤锥缠绕机的工作过程进行人工干预。 - First, the paper analyses winding characteristic of reversible winding machine, and erects a mathematical model, and detailed analyses constant facial speed control about winding textile, and calculates correlative parameter.
首先，本文通过对可逆卷绕机构卷绕特性的分析，建立了织物卷绕过程的数学模型，并利用该模型分析了织物卷绕过程的恒线速度控制，对相关的机电参数进行了计算。 - Based on analysis about working principle of varying load and speed of conventional three-phase induction generator excited by capacitors, the determination of excited capacitors to minimize the reactive power of control winding under variable load and speed is given.
在分析传统电容励磁的三相异步发电机变速变载运行机理的基础上，研究了变速变负载运行时控制绕组的无功容量最小化时励磁电容的取值方法。 - Application of fuzzy-intelligent control on winding system
模糊智能控制在卷绕系统中的应用 - The design principle, basic composition and implementing method of tension control system of digital control fiber winding machine are described.
主要论述了数控纤维缠绕机张力控制系统的设计原理、基本构成及其实现方法。 - A three phase symmetry AC winding is used as control winding of the inner stator, a car including ring-like PM rotor as correcting weight.
以三相对称交流绕组作为内定子控制绕组，包括环形磁钢永磁转子的小车作为校正质量。 - Study on Tension Control During Winding Insulation Tape
绝缘带包扎时张力控制的研究 - Study of vibration control of winding system in the course of acceleration
提升系统在加速过程中的振动控制研究 - This paper introduces the work concept of a PWM variable frequency ID regulate velocity system, work characteristics and application in microcomputer control filament winding machine system.
本文介绍了一种脉冲宽度调制（PWM）变频调速系统的工作原理及特性，以及在微机控制纤维缠绕机（MCFWM）系统中的应用。 - How to get the stator parameters of drive control winding;
如何获得转矩控制绕组的定子电阻和定子漏感； - The vector decoupling control strategy of brushless doubly-fed machine that bases on synchronous rotary reference frame, can realize decoupling of the stator current of torque and the stator current of magnetic chain in control winding;
基于同步旋转坐标系的无刷双馈电机（Brushlessdoubly-FedMachine，简称BDFM）的矢量解耦控制策略，可以实现控制绕组定子电流的转矩分量和磁链分量的解耦。 - By numerical simulation monitoring technology of control system, STD industrial controller is achieved to microcomputer control filament winding. its steady speed precision, tracking property and photoelectric coder property are monitored.
本文采用控制系统的数字仿真技术，在STD工业控制机上实现了对微机控制纤维缠绕机控制系统的稳速精度、跟踪性能和光电编码器的性能的监测。 - Permanent magnet keeps on position of off/ on breaker for vacuum circuit breaker. Control winding did not galvanize, move iron core had two steady working states.
永久磁铁保持真空断路器的分合闸位置，控制线圈不通电时，动铁芯具有分合闸两个稳定工作状态。 - The temperature parameter of the elements is employed to control the winding tension to respected values.
缠绕过程中缠绕带的缠绕张力采用温度参数法控制，使其达到预定值。 - Based on the analysis of the feature of the electromagnetic coupling relationship between the power winding and control winding, an equivalent circuit of a doubly-fed brushless reluctance machine is presents, which only needs frequency referring and without pole number referring.
根据两套定子绕组的电磁耦合关系特点，提出一种基于频率归算而无需进行极数归算的无刷双馈磁阻电机的等效电路。 - Error Analysis and Elimination of Control System in Microcomputer Numerical Control Fibre Winding Machine
微机数控纤维缠绕机控制系统的误差分析及处理 - Study on Tension Control in Winding System of Vacuum Coating Machine
真空镀膜机卷绕系统中张力控制的研究 - Optimal Analysis of Reactive Capacity of Control Winding for Dual Stator-Winding Induction Generator Operating With Variable Speed
变速运行的双绕组异步发电机控制绕组无功容量的优化分析 - The motors have characteristics of poor thermal performance and large load change, they also work with bad working environment and it is hard to control winding temperature rising.
这种电机负荷变化大、工作环境恶劣，而且通风散热条件差，绕组温升控制难。 - There are two sets of different pole pairs winding in stator called power winding and control winding respectively; the types of traditional rotor are cage rotor and reluctance rotor.
其定子有两套独立绕组，分别称为功率绕组和控制绕组；传统转子类型有笼型转子和磁阻转子。 - On the aspect of stator windings, pitch and turns and wire gauge of two sets of winding is determined, the position of power winding and control winding is designed.
在定子绕组设计方面，确定了两套绕组的节距、匝数、线规以及功率绕组和控制绕组的位置。 - On the control winding flux given in different and load such changes, a large number of experiments for the power factor showed that the value of flux given could regulate the size of power factor also regulate the nature of reactive power.
对控制绕组在不同磁链给定及负载等变化时的功率因数进行了大量实验，实验结果表明，调节磁链给定值既能调节功率因数的大小也能调节其无功功率性质。 - As an induction motor, it is inevitably for the levitation control winding of bearingless induction motor to induce current in the squirrel cage. It is the current loss of the levitation control winding.
无轴承异步电机作为一种感应电机，其悬浮控制绕组在鼠笼转子中不可避免地感应电流，也就是存在电流损耗。 - Simulation and experiments showed that different control winding flux given had the different impact on the two starting methods, but at the same experimental conditions, the transient process was different that pulled in the double-fed from asynchronous at different times.
仿真和实验表明，不同控制绕组磁链给定对两种启动过程都有影响，而且在同一实验条件下，不同时刻从异步牵入双馈的暂态过程不一样。 - This kind of electrical machinery excitation is through adjusts the electrical machinery the control winding electric current to realize.
这种电机的励磁是通过调节电机的控制绕组的电流来实现的。